Graphite
Sheets
| Section | Type | Description |
|---|---|---|
 | RX® Egraflex GHE RX® Egraflex GHE datasheet (962kB) | Special tanged insert in Stainless steel 316. Avoids the use of adhesive. Gives higher chemical and mechanical resistance. |
| | RX® Egraflex SPG RX® Egraflex SPG datasheet (47kB) | Graphite sheet 98% reinforced with perforated SS insert. Universal material for (petro)chemicals. Used for high pressure and temperatures. |
 | RX® Egraflex GHE-PRO | Special tanged insert in Stainless steel 316. Avoids the use of adhesive. Gives higher chemical and mechanical resistance. Low emision. With TA-Luft certificate. |
 | RX® Egraflex GHE-AS | Same as GHE with anti-sticking treatment on both sides. |
 | Sigraflex HD | "Alternation of Expanded graphite and stainless steel layers. All impregnated with a high temperature resin. Both surfaces are treated against sticking. Recommended for high surface pressures or where small gasket width has to be used." |
 | Sigraflex HD-PRO | "Alternation of Expanded graphite and stainless steel layers. All impregnated with a high temperature resin. Both surfaces are treated against sticking. Recommended for high surface pressures or where small gasket width has to be used. Very low emision. With TA-Luft certificate." |
 | RX® Egraflex GTC | GTC is used where no metal insert is accepted, in the most cases for chemical resistance reasons. |
 | RX® Egraflex GTS | "Expanded graphite on a stainless steel foil of 0,05 mm. The steel reinforcement gives a good stability to cut gasket and prevents damage during manipulation. Not recommended for high surface pressures." |
 | RX® Egraflex NR | "Same as GTS but with a pure Nickel insertion foil 0,013mm thick. For high Chemical resistance. Recommended for Chlorine applications." |
 | Novaphit SSTC Novaphit SSTC (76kB) | "The special expanded metal insert gives a lot of improvements :
|
 | Sigraflex MF | expanded graphite sheet (purity 99,85%) with 2 SS316 surface layers (thickness 0,05mm) and SS316 tanged insert. The SS316 surface layers are with Teflon® (PTFE) coating, thickness 50 µm. Gaskets with inner-eyelet SS316. Very low emision with low surface stress. Conform TA-Luft. |
Gaskets
| Section | Type | Description |
|---|---|---|
 | Sigraflex Select | expanded graphite sheet, purity >98%, with 2 SS316 inserts (thickness 0,05mm). With inner eyelet SS316. Low emision, conform TA-Luft. |
 | ring-IE | "Soft gasket protected by a metal jacket named ""eyelet"". Prevents erosion of the gasket material when turbulent flow is present. Can prevent diffusion of gas thru the gasket material." |
 | RX® Egraflex MRG | "Steel ring covered with expanded graphite. Needs a very low bolt stress. Specialy for large dimensions." |
Tape
| Section | Type | Description |
|---|---|---|
 | RX® Egraflex GCT | "Expanded graphite band with self-adhesive on one side. Crinkled to be able to make round gaskets or to cover round gaskets like camprofile (K9 for ex)" |
 | RX® Egraflex GPT | Expanded graphite band with self-adhesive on one side. |
