Camprofile gaskets
Camprofiles are often used as heat exchanger gaskets. At the ERIKS production plant in Botlek, Rotterdam these gaskets can be produced very quickly. We can also supply standard sizes for DIN and ANSI flanges.
| Section | Type | Description |
|---|---|---|
 | CAMPRO KV | Standard Basic type for all special dimensions present in pressure vessels like heat exchangers, reaction towers, flanges with male & female and tongue & grove construction. Can also be equipped with partition bars. |
 | CAMPRO KV9 | Type KV incorporating an integral outer location ring. Designed for standard flanges raised face and flat face. High stability. |
 | CAMPRO KV9L | "Same as KV9. the integral outer location ring is replaced by a loose ring. Less stability than type KV9 but compensate without damage the great thermal variations between inner and outer diameter." |
 | CAMPRO KB | "The confex types have the following advantages: the facing material is more compressed in the mid zone so that lower bolt loads are needed to reach optimum sealing. Compensate easier the geometrical problems of the flanges Compensate flange rotation specialy advised for DIN (EN 1092) flanges" |
 | CAMPRO KB9 | "The confex types have the following advantages: the facing material is more compressed in the mid zone so that lower bolt loads are needed to reach optimum sealing. Compensate easier the geometrical problems of the flanges Compensate flange rotation specialy advised for DIN (EN 1092) flanges" |
 | CAMPRO KB9L | "The confex types have the following advantages: the facing material is more compressed in the mid zone so that lower bolt loads are needed to reach optimum sealing. Compensate easier the geometrical problems of the flanges Compensate flange rotation specialy advised for DIN (EN 1092) flanges" |
 | CAMPRO KH | Camprofile for special applications where high radial forces apply. |
